Irrigation Valves: What is a Valve and How to Fix or Replace Them in 2024

Irrigation valves are essential components in garden and lawn irrigation systems that help you control the flow of water to different zones within the system. They are located inside the valve box.

You need to know how the valves work, whether you want to install a new system or update your existing one. Also, you should be aware of how to find the buried irrigation valves and how to replace them.

What is an Irrigation Valve?

These are valves that control the flow of water and release water into sprinklers or emitters. It’s like a faucet or a tap but specifically designed for managing water distribution. In drip irrigation, you should not confuse it with a master valve. The master valve distributes water to other irrigation valves.

In larger irrigation systems, the valves are used to divide the area into zones. Each area can be controlled independently, allowing for more efficient watering. Also, irrigation can be segmented based on the required water pressures.

The valves can either be manual, electric, or powered by a battery. They include ball valves, butterfly valves, gate valves, and diaphragm valves. Your choice depends on the type of application, pressure requirements, and size of the system.

Signs of Faulty Irrigation Valve

Sudden changes in water pressure, switching from high to low are signs of an issue in the valve. If there are faults in your irrigation valves, you’ll notice the signs.

  • Leaks and pooling water around the valve

  • Sprinkler heads not turning off

  • Low water pressure in the sprinkler heads and emitters.

  • No water flow in some areas

  • Constant running of water in one or more sprinkler heads or emitters.

Repairing an Irrigation Valve

Replacing the valve may be expensive at times, and it becomes much easier to repair than replace.

Water pressure issues can be due to clogging around the valve. You can troubleshoot the irrigation system and clear clogs to fix the problem.

Shut off the water supply before working on the valve and inspect valve components. Next, clear the valves thoroughly to remove dirt, debris, and any materials clogging the system.

Replace seals or diaphragms if the valve is leaking. After doing the repairs, it’s time test the valves to make sure they open and closes properly. Turn on the water supply and activate the irrigation system to verify that the valves operate correctly.

Continue monitoring to ensure that the problem has been resolved. You should install filters before the valve to prevent clogging.

Upgrade with Mazero irrigation emitters.

At Mazero, we offer a range of high-quality irrigation valves. Whether it’s gate valves, diaphragm valves, or butterfly valves, we have the perfect solution to suit your irrigation system.

Upgrade to the next level of precision and efficiency. Don’t wait any longer to experience superior performance and reliability. Make the smart choice today and transform your irrigation system with Mazero.

Looking for a professional repairs guy? We’ve got you covered. Contact us today!

Leave a Reply

Your email address will not be published. Required fields are marked *